Technical Information & Fitting Guide

_ REF. Lever Fitting Information

Assembly1
  1. (1) Set the 8mm square spindle according to figure 2A below.
  2. (2) Set the adapter with through holes
  3. (3) Set the adapter with thread
  4. (4) Adjust and screw the two M4 screws
  5. (5) Break and remove inside parts in both plastic adapters (see pictures)
  6. (6/7) Apply handle with the plate bottom up, adjust and press against the door until you hear "click"
  7. (8) Screw the M6 threaded pins into the square spindle

_ REF. Door Drilling

With or without embedded fittings in the door.

Assembly2

Tupai 5S Line Round Rose Assembly

Assembly2

Tupai 5S Line Square Rose Assembly

Assembly2